Scientific program

June 1st 2016

Main Entrance 8:30 18:00 Registration    
Auditorium 9:20 9:45 Opening Ceremony    
Auditorium 9:45 10:20 Plenary Lecture A review of gradient effect and size effect in high cycle multiaxial fatigue of metals. Prof. Thierry Palin-Luc  
Room number Start End Session Title Authors
Room 005 10:50 11:10 Welding FATIGUE OF WELD ENDS UNDER COMBINED IN- AND OUT-OF-PHASE MULTIAXIAL LOADING SHAMS, E - VORMWALD, M.V.
11:10 11:30 Comparative study of multiaxial fatigue methods applied to welded joints in marine structures VAN LIESHOUT, P.S - DEN BESTEN, J.H - KAMINSKI, M.L
11:30 11:50 FATIGUE LIFE INVESTIGATIONS CONSIDERING WELDING RESIDUAL STRESS AND SHAPE EFFECTS FOR A NON-LOAD CARRYING FILLET JOIN TSUTSUMI, S.T. - MORITA, K - FINCATO, R.F. - MOMII, H
11:50 12:10 ON THE USE OF THE MODIFIED WÖHLER CURVE METHOD TO DESIGN FRICTION STIR WELDED TUBULAR JOINTS AGAINST MULTIAXIAL FATIGUE HATTINGH, D.G - JAMES, M.N - MAGGIOLINI, E - SUSMEL, LS - TOVO, R
12:10 12:40 COFFEE BREAK
12:40 13:00 Notch I An Elasto-Plastic Appr. to Estimate Lifetime of Notched Component under Variable Amplitude Fatigue Loading: A Preliminary Inv NAMIQ, Z
13:00 13:20 BIAXIAL FATIGUE TESTS OF NOTCHED SPECIMENS FOR AISI 304L STAINLESS STEEL BERETTA, G - CHAVES, V - NAVARRO, A
13:20 13:40 PERIDYNAMIC MODELING OF DAMAGE IN NOTCHED COMPOSITES UNDER CYCLIC LOADING MADENCI, E - HU, Y - PHAN, N
13:40 14:00 A UNIFIED RULE TO ESTIMATE MULTIAXIAL ELASTOPLASTIC NOTCH STRESSES AND STRAINS UNDER IN-PHASE PROPORTIONAL LOADINGS MEGGIOLARO, M.A - TUPIASSU PINHO DE CASTRO, J - NAZARE MARQUES, L.F - MARTHA, L.F
14:00 15:30 LUNCH
15:30 15:50 HCF HIGH CYCLE TORSIONAL FATIGUE PROPERTIES OF 17-4PH STAINLESS STEEL YANASE, K - SCHÖNBAUER, B - ENDO, M
15:50 16:10 ULTRASONIC FATIGUE TESTING DEVICE UNDER BIAXIAL BENDING BRUGGER, C - PALIN-LUC, T - OSMOND, P - BLANC, M
16:10 16:30 A MULTISCALE DAMAGE MODEL FOR HIGH CYCLE FATIGUE LIFE PREDICTION IN POLYCRYSTALLINE METALLIC MATERIALS FRANCK, F - CHARLES, C - JIHED, J - HELA, H
16:30 16:50 MICROSTRUCTURE-DEPENDENT PREDICTIONS OF THE EFFECT OF DEFECT SIZE AND SHAPE ON THE HIGH-CYCLE FATIGUE STRENGTH GUERCHAIS, R - MOREL, F - SAINTIER, N.
16:50 17:20 COFFEE BREAK
17:20 17:40 Fatigue criteria II MULTIAXIAL FATIGUE CRITERION BASED ON PARAMETERS FROM TORSION AND AXIAL S-N CURVE. MARGETIN, M - DURKA, R - CHMELKO, V
17:40 18:00 FRACTURE TOUGHNESS ESTIMATION OF SM490A NOTCH CT SPECIMEN BY MULTIAXIAL FRACTURE STRAIN MODEL YOUN, G - NAM, H - RYU, H - KIM, Y - KAMAYA, M.Y
18:00 18:20 COMPARISON BETWEEN SSF AND CRITICAL-PLANE MODELS TO PREDICT FATIGUE LIVES UNDER MULTIAXIAL PROPORTIONAL HISTORIES MANUEL, M - LUIS, L - MARCO ANTONIO, M.A - JAIME, J.T.P
Room 006 10:50 11:10 Random&Variable I ESTIMATION OF FATIGUE LIFE FOR SELECTED METALLIC MATERIALS UNDER MULTIAXIAL VARIABLE FATIGUE LOADING WANG, Y - SUSMEL, L
11:10 11:30 A study of damage accumulation for thin welded joints QUENTIN, Q - HABIBOU, H - ELIAS, E
11:30 11:50 FATIGUE CRACK GROWTH BEHAVIOR UNDER MULTIAXIAL VARIABLE AMPLITUDE LOADING GATES, R - FATEMI, AF - IYER, N - PHAN, NP
11:50 12:10 INCORPORATION OF MEAN/MAXIMUM STRESS EFFECTS IN THE MULTIAXIAL RACETRACK FILTER MEGGIOLARO, MAM - CASTRO, JTPC - WU, HW
12:10 12:40 COFFEE BREAK
12:40 13:00 Contact I HEAT SOURCES ESTIMATION UNDER FRETTING LOADING BASED ON INFRARED IMAGE PROCESSING: APPLICATION TO CRACK NUCLEATION CONDITIONS MOUSTAFA, A - BERTHEL, B - FOUVRY, S - CHARKALUK, E
13:00 13:20 ROLLING CONTACT FATIGUE CRACK GROWTH IN RAILS_XFEM 3D MULTI-SCALE MODELLING TAKING INTO ACCOUNT THE RAIL BENDING MAI, S.H - NGUYEN-TAJAN, M.-L - GRAVOUIL, A
13:20 13:40 ANALYSIS OF INITIAL CRACK PATH IN FRETTING FATIGUE VÁZQUEZ, J - Astorga, S - Navarro, C - DOMÍNGUEZ, J
13:40 14:00 ANALYSIS OF FATIGUE BEHAVIOUR OF STAINLESS STEELS UNDER HYDROGEN INFLUENCE ANGELOVA, D - YORDANOVA, R - YANKOVA, S
14:00 15:30 LUNCH
15:30 15:50 High temperature BIAXIAL AND TRIAXIAL CREEP DAMAGE EVALUATION FOR TYPE 304 STAINLESS STEEL KOBAYASHI, H - OHKI, R - ITOH, T - SAKANE, M
15:50 16:10 Multiaxial Creep-Fatigue Damage Analysis of Power Plant Components under Transient Thermal Loading KONSTANTIN, K. - YEVGEN, Y
16:10 16:30 FATIGUE CRACK ORIENTATION UNDER MULTI-AXIAL STRESS STATES FROM THERMAL FLUCTUATIONS AND RESIDUAL STRESSES TAHERI, S - FATEMI, AF
16:30 16:50 FATIGUE AND FRACTURE OF A BRAZED W/CU JOINT HEAT SINK UNDER CYCLIC HIGH-HEAT-FLUX LOADS YOU, J.H - LI, M
16:50 17:20 COFFEE BREAK
17:20 17:40 Application I MULTIAXIAL FATIGUE OF IN-SERVICE ALUMINIUM LONGERINS FRO HELICOPTER ROTOR-BLADES SHANYAVSKIY, A - TOUSHENTSOV, L
17:40 18:00 IMPLEMENTATION OF FATIGUE MODEL FOR UNIDIRECTIONAL LAMINATE BASED ON FINITE ELEMENT ANALYSIS: THEORY AND PRACTICE CARRELLA-PAYAN, D - MAGNEVILLE, B - HACK, M - NAITO, T - URUSHIYAMA, Y - YAMAZAKI, W - YOKOZEKI, T - VAN PAEPEGEM, W
18:00 18:20 THE NON-PROPORTIONALITY OF LOCAL STRESS PATHS IN ENGINEERING APPLICATIONS RIESS, C - OBERMAYR, M - VORMWALD, MV
  18:20 18:40   Pressure vessels design methods using the codes, fracture mechanics and multiaxial fatigue FATIMA, M - JILALI, N - MOHAMED, E
Room 008 10:50 11:10 Nonproportional I INVESTIGATION ON PARAMETRIC REPRESENTATION OF PROPORTIONAL AND NONPROPOTIONAL MULTIAXIAL FATIGUE RESPONSES ALBINMOUSA, J
11:10 11:30 Atomistic modeling of different loading paths in single crystal cooper and aluminum PEZER, R - TRAPIĆ, I
11:30 11:50 Fatigue Strength of SS400 Steel under Non-proportional Loading MORISHITA, T - TAKAOKA, T - ITOH, T. I.
11:50 12:10 FATIGUE LIFE ASSESSMENT OF THIN-WALLED WELDS UNDER NON-PROPORTIONAL LOADINGS BY THE SHEAR STRESS RATE INTEGRAL APPROACH BOLCHOUN, A - SONSINO, C.M - KAUFMANN, H - MELZ, T
12:10 12:40 COFFEE BREAK
12:40 13:00 Fatigue criteria I A FATIGUE CRITERION TO DESCRIBE THE COMBINED EFFECTS OF BIAXIAL TENSION AND MEAN STRESS VIDIT, V - VÉRONIQUE, V - ELEONORE, E - EMMANUEL, E
13:00 13:20 THE EFFECT OF MEAN SHEAR STRESS ON TORSIONAL FATIGUE STRENGTH OF 34CRNIMO6 STEEL PALLARÉS-SANTASMARTAS, L - MERZEAU, J - AVILÉS, R - GIROT, F - ALBIZURI, J - SAINTIER, N
13:20 13:40 DEVELOPMENT OF MULTIAXIAL FATIGUE DAMAGE PARAMETER AND LIFE PREDICTION METHODOLOGY FOR NON-PROPORTIONAL LOADING SUMAN, S - KALLMEYER, A - SMITH, J
13:40 14:00 PLASTIC FLOW EQUATIONS FOR THE LOCAL STRAIN APPROACH IN THE MULTIAXIAL CASE A.NAVARRO, C.MADRIGAL, C.VALLELLANO
14:00 15:30 LUNCH
15:30 15:50 Experiments I RATCHETING DEFORMATION OF 316L STAINLESS STEEL THIN WIRE UNDER MULTIAXIAL LOADING CONDITIONS FU, S - YU, D - CHEN, G - CHEN, X
15:50 16:10 3D-MIXED-MODE-LOADING: MATERIAL CHARACTERISTIC VALUES AND CRITERIA'S VALIDITY RICHARD, H. A - EBERLEIN, A
16:10 16:30 DEVELOPMENT OF A TEST RIG FOR ROUND BARS UNDER OUT-OF-PHASE BENDING AND TORSIONAL LOADING PAUL, P - MANUELA, M
16:30 16:50 Identification of forming limits at fracture using an in-plane biaxial tensile test with a dedicated cruciform specimen SONG, X - LEOTOING, L - GUINES, D - RAGNEAU, E
16:50 17:20 COFFEE BREAK
17:20 17:40 Life estimation EQUI-BIAXIAL LOADING EFFECT ON AUSTENITIC STAINLESS STEEL FATIGUE LIFE SOUMAYA, B - STEPHAN, S - JEAN CHRISTOPHE, J.C - CEDRIC, C
17:40 18:00 A Probabilistic Approach for Multiaxial Fatigue Criteria MUÑIZ CALVENTE, M - BLASÓN, S - DE JESÚS, A.M.P - CORREIA, J.A.F - FERNÁNDEZ CANTELI, A
18:00 18:20 Modeling of Crack Growth under Mixed Mode Loading BOLJANOVIC, S - MAKSIMOVIC, S
Social program 20:30 21:30 Visit to Reales Alcázares
22.00 23:30 Welcome cocktail

 

June 2nd 2016

Main Entrance 9:00 18:00 Registration
Auditorium 9:30 10:05 Plenary Lecture Multiaxial Deformation and Fatigue of Magnesium Alloys. Prof. Yanyao Jiang
Room number Start End Session Title Authors
Room 005 10:20 10:40 Application II FATIGUE BEHAVIOR AND LIFE PREDICTIONS OF CARBURIZED AUTOMOTIVE GEAR STEELS UNDER MULTIAXIAL STRESS STATES JO, B - FATEMI, A - SIM, Y - SHARIFIMEHR, S
10:40 11:00 A PLASTIC STRESS INTENSITY FACTOR APPROACH TO TURBINE DISK STRUCTURAL INTEGRITY ASSESSMENT SHLYANNIKOV, V - ZAKHAROV, A - YARULLIN, R
11:00 11:20 MULTI PURPOSE A METAL FATIGUE SENSOR IGNATOVICH, S.R - KARUSKEVICH, M.V - MENOU, A - Maslak, T.P - MARUSCHAK, P.O - PANIN, S.V - BERTO, F.
11:20 11:40 ENGINEERING APPROACH FOR VEHICLE STRUCTURE SERVICE LIFE ASSESSMENT UNDER COMBINED LOADING VACLAVIK, J - CHVOJAN, J - KEPKA, M - KEPKA JR., M. JR
11:40 12:10 COFFEE BREAK
12:10 12:30 Random&Variable II MULTIAXIAL FATIGUE OF CAST ALUMINUM EN AC-42000 T6 (G-AlSi7Mg0.3 T6)  FOR AUTOMOTIVE SAFETY COMPONENTS SONSINO, C.M - FRANZ, R
12:30 12:50 RANDOM NON-PROPORTIONAL FATIGUE TESTS WITH PLANAR TRI-AXIAL FATIGUE TESTING MACHINE INOUE, T - NAGAO, R - TAKEDA, T
12:50 13:10 MODAL MODEL BASED VIBRATION-FATIGUE ANALYSIS MRŠNIK, M - SLAVIČ, J - BOLTEŽAR, M
13:10 13:30 ON THE ASSESSMENT OF MULTIAXIAL FATIGUE DAMAGE ACCUMULATION UNDER VARIABLE AMPLITUDE LOADING ANES, V - REIS, LR - FREITAS, MF
13:30 15:00 LUNCH
15:00 15:20 Crack I CRACK INITIATION DIRECTION UNDER SEVERE STRESS GRADIENT AND NON-PROPORTIONAL MULTIAXIAL LOADING: THE FRETTING CASE ARAÚJO, J.A - CARDOSO, R.A - FERREIRA, J.L.A - CASTRO, F.C - DA SILVA, C.R.M
15:20 15:40 Estimation of fatigue strength under multiaxial cyclic loading by varying the critical plane orientation KUREK, M - ŁAGODA, T - VANTADORI, SV - CARPINTERI, AC
15:40 16:00 STRESS-STATE DEPENDENT COHESIVE MODEL FOR FATIGUE CRACK GROWTH. BHARADWAJ, M - BANERJEE, A - KUMAR, G - KUMAR, R - I, S
16:00 16:20 CRACK FRONT SEGMENTATION UNDER COMBINED MODE I- AND MODE III-LOADING EBERLEIN, A - RICHARD, H. A
16:20 16:50 COFFEE BREAK
16:50 17:10 Crack II THE STRESS CONCENTRATION NEAR A TRANSVERSAL CRACK IN THE ELASTIC SEMI-STRIP VAYSFELD, D - ZHURAVLOVA, Y.U
17:10 17:30 FAILURE OF FIBER REINFORCED COMPOSITES UNDER MULTIAXIAL STRESSES ON MICROSCALE MAROTZKE, C - FELDMANN, T
17:30 17:50 PREDICTION OF THE CRITICAL STRESS TO CRACK INITIATION ASSOCIATED TO THE INVESTIGATION OF FATIGUE SMALL CRACK NOUREDDINE, N - ZITOUNI, Z - JEAN MARIE, J.M - GERARD, G
Room 006 10:20 10:40 Numerical I NUMERICAL SIMULATION OF EARLY-AGE SHRINKAGE EFFECTS ON RC MEMBER DEFLECTIONS AND CRACKING DEVELOPMENT BERNARDI, P - CERIONI, R - MICHELINI, E - SIRICO, A
10:40 11:00 3D FATIGUE CRACK GROWTH SIMULATION AND SOME PROBLEMS FOR COMPARISON WITH EXPERIMENTS. KIKUCHI, M - WADA, Y - TAKAHASHI, A
11:00 11:20 COUPLED FRACTURE MODES UNDER ANTI-PLANE LOADING POOK, L - BERTO, FB - CAMPAGNOLO, AC
11:20 11:40 SIMULATION OF CONTACT ON CRACK LIPS AND ITS INFLUENCE ON FATIGUE LIFE PREDICTION PIERARD, O - JIN, YJ - WYART, E - DOMPIERRE, B - BÉCHET, E.W
11:40 12:10 COFFEE BREAK
12:10 12:30 Nonproportional II GROWTH OF LONG FATIGUE CRACKS UNDER NON-PROPORTIONAL LOADINGS – EXPERIMENT AND SIMULATION HOS, Y - VORMWALD, M
12:30 12:50 STUDY OF WHITE ETCHING CRACK FORMATION BY CYCLIC COMPRESSION-TORSION EXPERIMENTS AVERBECK, S - KERSCHER, E
12:50 13:10 Creep-fatigue Life Evaluation of High Chromium Ferritic Steel under Non-proportional Loading MORISHITA, T. M. - MURAKAMI, Y - ITOH, T. I. - TANIGAWA, H
13:10 13:30 APPLICATION OF THE MOMENT OF INERTIA METHOD TO THE CRITICAL-PLANE APPROACH MEGGIOLARO, MAM - CASTRO, JTPC - WU, HW
13:30 15:00 LUNCH
15:00 15:20 Contact II AN ALL-IN-ONE NUMERICAL METHODOLOGY FOR FRETTING WEAR AND FATIGUE LIFE ASSESMENT LLAVORI, I - URCHEGUI, M.A - TATO, W - GOMEZ, X
15:20 15:40 FATIGUE LIFE PREDICTIONS FOR THE WHEEL-RAIL CONTACT AREA IN LARGE OFFSHORE TURRET BEARINGS LASSEN, T - MIKULSKI, Z
15:40 16:00 A STUDY ON DETERMINATION AND PREDICTION OF FRETTING FATIGUE STRENGTH BY USING A PURE STRESS-BASED CRITERION. HAUSCHILD, S - HOFMANN, S - LEIDICH, E
16:00 16:20 INVESTIGATION OF CONTACT INFLUENCE ON FRETTING FATIGUE CRACKING FROM NON COLLINEAR FRETTING FATIGUE EXPERIMENTS CAMILLE, C - VINCENT, V - SIEGFRIED, S
16:20 16:50 COFFEE BREAK
16:50 17:10 Experiments III SYSTEMATIC VALIDATION OF EXPERIMENTAL DATA USABLE FOR VERIFYING THE MULTIAXIAL FATIGUE PREDICTION METHODS PAPUGA, J - PARMA, S - RŮŽIČKA, M
17:10 17:30 MULTIAXIAL ELASTOPLASTIC CYCLIC LOADING OF AUSTENITIC 316L STEEL MAZÁNOVÁ, V - POLÁK, J - ŠKORÍK, V - KRUML, T
17:30 17:50 INTRINSIC BEHAVIOUR OF MODES II, III AND MIXED MODE II+III FATIGUE CRACKS IN METALLIC MATERIALS. VOJTEK, T - POKLUDA, J - HOHENWARTER, A - PIPPAN, R
17:50 18:10 EXPERIMENTAL AND ANALYTICAL STUDY OF CRACKS UNDER BIAXIAL FATIGUE M.MOKHTARISHIRAZBAD, P.LOPEZ-CRESPO, B.MORENO, A.LOPEZ-MORENO, D.CAMAS, M.ZANGANEH
Room 008 10:20 10:40 Notch II POINTED NOTCHES MADE OF TI-6AL-4V UNDER MULTIAXIAL LOADING: FATIGUE ASSESSMENT BASE ON LOCAL SED BERTO, F - CAMPAGNOLO, A - WELO, T
10:40 11:00 A COMPARISON OF METHODS FOR CALCULATING NOTCH TIP STRAINS AND STRESSES UNDER MULTIAXIAL LOADING LUTOVINOV, M - ČERNÝ, J - PAPUGA, JP
11:00 11:20 CHARACTERISTICS OF THE PROCESS ZONE AT SHARP NOTCH ROOTS SUBJECT TO IN-PLANE AND ANTI-PLANE LOADING RAMESH, R - HILLS, D.A
11:20 11:40 AVERAGED STRAIN ENERGY DENSITY-BASED SYNTHESIS OF CRACK INITIATION LIFE IN NOTCHED STEEL BARS UNDER TORSIONAL FATIGUE BERTO, FB - CAMPAGNOLO, AC - MENEGHETTI, G - TANAKA, K
11:40 12:10 COFFEE BREAK
12:10 12:30 Experiments II MULTIAXIAL FRACTURE IN PEARLITIC STEELS UNDER HYDROGEN EMBRITTLEMENT ENVIRONMENTAL CONDITIONS TORIBIO, J - VERGARA, D - LORENZO, M
12:30 12:50 Biaxial behavior tests on Inco718DA cross-shaped samples controlled by Digital Image Correlation VASILE-IONUT, V.I - MARTIN, M - RODRIGUE, R - ARNAUD, A - ALEXANDRE, A
12:50 13:10 BIAXIAL TESTING AND MODELLING OF FATIGUE IN NICKEL SUPERALLOYS NOWELL, D - PAYNTER, R - SAHADI, J
13:10 13:30 Development of a Very High Cycle Fatigue (VHCF) Multiaxial Testing Device VIEIRA, M - FREITAS, J.M - RIBEIRO, A - REIS, L - FONTE, M
13:30 15:00 LUNCH
15:00 15:20 Materials I TWO-PARAMETER FRACTURE MODEL FOR CORTICAL BONE VANTADORI, S - CARPINTERI, A - BERTO, FB - FORTESE, G - RONCHEI, C - SCORZA, D
15:20 15:40 Tensile and Fatigue Behaviour of As-Forged AZ31B Extrusion GRYGUC, A - JAHED, H
15:40 16:00 MULTIAXIAL FATIGUE ASSESSMENT OF CRANKSHAFTS BY LOCAL STRESS APPROACHES LEITNER, M - TUNCALI, Z - CHEN, W - STEINER, R - GRÜN, F
16:00 16:20 FATIGUE LIFETIME ESTIMATION CONCEPT FOR SHORT FIBER REINFORCED THERMOPLASTICS WILMES, A - VORMWALD, 2 - HORNBERGER, K
16:20 16:50 COFFEE BREAK
16:50 17:10 Materials II FATIGUE MODELLING FOR GAS NITRIDING WEIL, H - JÉGOU, S - BARRALLIER, L - COURLEUX, A - BECK, G 
17:10 17:30 THE EFFECT OF PLY FOLDS AS MANUFACTURING DEFECT ON THE FATIGUE LIFE OF CFRP MATERIALS HÖRRMANN, S - ADUMITROAIE, A - SCHAGERL, M
17:30 17:50 LOW CYCLE BIAXIAL FATIGUE BEHAVIOR OF DIRECT AGED NICKEL-BASED SUPERALLOY INCONEL718 AND FRACTOGRAPHIC INVESTIGATIONS PIERRE, P
17:50 18:10 THEORICAL STUDY ON MECHANICAL PROPERTIES OF AZ31B MAGNESIUM ALLOY SHEETS UNDER MULTIAXIAL  LOADING CONDITIONS ZNAIDI, A - DAGHFAS, O - GUELLOUZ, S - NASRI, R                                                                                            
Room 005 18:10 18:40 Scientific Committee Meeting  
Social program 20:30 21:30 Banquet Los Seises Hotel

 

June 3rd 2016

Main Entrance 9:00 13:00 Registration    
Auditorium 9:30 10:05 Plenary Lecture Multiaxial fatigue and total life approaches: a perspective based on two decades of research. Prof. Andrea Spagnoli
Room number Start End Session Title Authors
Room 005 10:20 10:40 Materials III EFFECT OF MOLDING PROCESSES ON MULTIAXIAL FATIGUE STRENGTH IN SHORT FIBRE REINFORCED POLYMER SAWADA, T - AOYAMA, H
10:40 11:00 Computational Simulation of Biaxial Fatigue Behaviour of Lotus-type Porous Material KRAMBERGER, J - ŠORI, M - ŠRAML, M - GLODEŽ, S
11:00 11:20 HYDROGEN EMBRITTLEMENT PROPERTIES OF S45C CARBON STEEL UNDER MULTIAXIAL LOADING YAMAMOTO, T - MITSUNE, M - TAKEMURA, T - DOI, M - TSUTSUMI, N - ITOH, T.I
11:20 11:40 FIBRE-MATRIX DEBONDS IN UNIDIRECTIONAL FIBRE-REINFORCED COMPOSITES UNDER BIAXIAL TRANSVERSE LOADS TAVARA, L - MANTIC, V - REINOSO, J - ESTEFANI, A - PARIS, F
11:40 12:10 COFFEE BREAK
12:10 12:30 Numerical II DUCTILE FRACTURE MODELLING AND J-Q FRACTURE MECHANICS: A CONSTRAINT BASED FRACTURE ASSESSMENT APPROACH LARROSA, N.O - AINSWORTH, R.A
12:30 12:50 NUMERICAL INVESTIGATION ON FATIGUE GROWTH OF MULTI SURFACE-FLAWS IN SHAFT UNDER ROTARY BENDING BY S-FEM SUGA, K - KIKUCHI, M - WADA, Y - KAWAI, H
12:50 13:10 NUMERICAL MODELING OF DUCTILE DAMAGE MECHANICS COUPLED WITH AN UNCONVENTIONAL PLASTICITY MODEL FINCATO, R - TSUTSUMI, S
  13:10 14:30 LUNCH
Room 006 10:20 10:40 Crack III EFFECT OF STATIC-CRACK OPENING STRESS ON SHEAR-MODE FATIGUE CRACK THRESHOLD OF BEARING STEELS OKAZAKI, S - WADA, K - MATSUNAGA, H - ENDO, M E
10:40 11:00 COMBINED SIMULATION OF FATIGUE CRACK NUCLEATION AND PROPAGATION BASED ON A DAMAGE INDICATOR SPRINGER, M - KARUNAMURTHY, B - NELHIEBEL, M - PETTERMANN, H
11:00 11:20 FATIGUE CRACK GROWTH OF ALUMINIUM ALLOY 7075-T651 UNDER NON-PROPORTIONAL MIXED MODE I AND II LOADS YU, X - LI, L - PROUST, G
11:20 11:40 CRACK INITIATION BEHAVIOR OF NOTCHED SPECIMENS UNDER SERVICE TYPE LOADING AT HIGH TEMPERATURE CUI, C - WANG, W
11:40 12:10 COFFEE BREAK
12:10 12:30 Fatigue criteria III A CRITICAL ANALYSIS OF THE MISES STRESS CRITERION USED IN FREQUENCY DOMAIN FATIGUE LIFE PREDICTION NIESŁONY, A
12:30 12:50 Interaction of Shear and Normal Stresses in Multiaxial Fatigue Damage Analysis GATES, R - FATEMI, AF
12:50 13:10 A MULTIAXIAL INCREMENTAL FATIGUE FORMULATION FOR THE CRITICAL-PLANE APPROACH MEGGIOLARO, MAM - CASTRO, J.T.P - WU, H
Auditorium 13:10 13:40 Concluding Remarks  
  13:40 15:00 LUNCH